TEL: +86-379-64122001
Home > News > Content
Precision Crossed Roller BearingSave Installation Space
Aug 22, 2017

Precision crossed roller bearings, due to the division of the inner ring or outer ring, after the load roller and spacing cage, and cross roller ring fixed together to prevent mutual separation, so the installation of cross roller shaft easy to use. As the rollers are arranged in cross, so only a set of cross-roller ring can withstand the load in all directions, compared with the traditional models, increased rigidity 3 to 4 times. At the same time, due to precision cross roller bearing inner ring or outer ring is a two-split structure, bearing clearance can be adjusted, even if the preload is applied, can also get high-precision rotary motion.

1, with excellent rotation accuracy

Precision cross roller bearing internal structure of the roller was 90 ° perpendicular to each other, the roller between the interval with a cage or isolation block, to prevent the roller tilt between the roller grinding each other. In addition, since the contact phenomenon or the locking phenomenon of the roller does not occur, and the inner and outer rings are divided structures, the gap can be adjusted, and even if the preload is applied, a high-precision rotational motion can be obtained.

2, operation and installation simplification

The outer ring or the inner ring, which is divided into two parts, is fixed together after the rollers and the retainers are loaded, so that the operation is very simple during installation.

3, to withstand greater axial and radial load

Since the rollers are vertically aligned with each other through the spacing retainers on the 90 ° V-groove rolling surfaces.

4, substantial savings in installation space

The size of the inner and outer rings of the precision crossed roller bearings is minimally miniaturized, especially the ultra-thin structure is close to the limit of the small size, and has high rigidity, so the most suitable for industrial robot joints or rotation parts, machining center Rotary table, manipulator rotation, precision rotary table, medical equipment, measuring instruments, IC manufacturing devices and other widely used.

5. High speed capability

6. To reduce the shaft length and processing costs, thermal expansion leads to limited geometric changes

7. The use of nylon separator, low inertia, low starting torque, easy to control the angular division

8. Optimize the preload, stiffness, guide roller running high precision

9. Carburized steel provides excellent impact resistance and surface wear resistance

10. Simple but full of lubrication